DESCRIPTION:

BondTAC™ S-1430 is a specially formulated hydrophobic (waterproof & water repellant), elastomeric membrane and adhesive coating ideally suited for residential and commercial waterproofing applications.

BondTAC S-1430 is specifically designed to provide a permanent waterproof and vapor proof barrier.  BondTAC S-1430 can be used to create a water barrier coating on both interior and exterior masonry walls, such as concrete block walls – using BondTAC to adhere drainage board, or to bond a heavy sheet membrane – without penetrating fasteners – to foundation walls, in order to meet code requirements for below-grade overall protective barrier thickness.  BondTAC is both truly elastomeric and retains the memory of its original application surface.  What this means is that if the surface that BondTAC is applied to cracks or shifts, the BondTAC coating will stretch with it without losing its waterproofing and air & vapor barrier abilities.  BondTAC S-1430 is commonly used to adhere sheets of extruded & expanded  polystyrene insulation board (XPS & EPS), insulated concrete forms (ICFs), and batt insulation to virtually any substrate without the use of penetrating fasteners such as nails or screws.

FEATURES & BENEFITS

  • Safe for use on polystyrene foam board
  • Waterproof – Repels Water!
  • Resistant to mold, fungus & bacterial growth
  • Sticks to virtually any surface
  • Excellent adhesion & aggressive Tack
  • Easily applied at normal & low temperatures
  • Fire Resistant
  • Flexible – will not crack or peel
  • Paintable – can be used under water-based decorative paint finishes. Not to be used with oil-based paints

WHERE TO USE

BondTAC™ S-1430 will adhere building components to virtually any surface, including rigid polystyrene insulation, where it provides a protective, waterproof barrier. Use S-1430 on exterior and interior concrete and concrete block walls to protect from moisture and water infiltration where exterior application is not readily accessible. Surface must be dry at time of application. BondTAC must penetrate a dry, porous surface in order to prevent further moisture and water infiltration.

This product’s adhesive characteristics make it to suitable to adhere rigid polystyrene insulation (such as XPS) to sheathing boards and other substrates.

Materials and components applied to Bondtac coated surfaces will adhere instantly and permanently.

BondTAC™ 800S Diluent and Surface Lubricant will permit adjustments to attain the proper fit of components and boards. Allow a minimum of one hour drying time after application of BondTAC™ S-1430, and then apply a sparing coat of BondTAC™ 800S to the surface of the BondTAC™ S-1430, using a brush or paint roller. Slide and fit the board or component into place within five minutes of BondTAC™ 800S application.

Apply BondTAC™ S-1430 to all interior and exterior sheathing boards, including gypsum wall board, glass-mat sheathing, Dens Glass, masonry, concrete, wood, fiberglass, metal surfaces, roofing components and shingles, window and door framing and sills to produce a water & vapor barrier.

BondTAC S-1430 may be used as an excellent primer for self-adhered air and vapor barrier systems, components and membranes over porous and non-porous substrates. Provides an excellent crack isolation barrier for shower enclosures, shower pans and tub surrounds.
BondTAC™ S-1430 will adhere most construction materials to virtually any substrate. This includes, but is not limited to, laps of polyethylene sheets, EPS & XPS foamboard, housewraps, ICF, wood, metal and gypsum board.

BondTAC™ S-1430 may also be used as a corrosion protective primer for all metal components, fasteners, sheet metal, etc. In applications where a topcoat finish is desirable, any protective coating may be used with the following exceptions: Oil-based enamels and varnishes are not suitable for use with Bondtac™ waterproofing products.

PACKAGING

  • Available in 5-gallon (18.9L) pails, 1-gallon (3.785L) cans and 1-quart (946ml)
  • PERFORMANCE & COMPLIANCE
  • ASTM E 96-05 – STANDARD TEST METHODS FOR WATER VAPOR TRANSMISSION OF MATERIALS
  • ASTM C 1306-08 – STANDARD TEST METHOD FOR HYDROSTATIC PRESSURE RESISTANCE OF A LIQUID-APPLIED WATERPROOFING MEMBRANE
  • CAN/ULC-S102 – STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES

PERFORMANCE & COMPLIANCE

  • PERFORMANCE & COMPLIANCE
  • ASTM E 96-05 – STANDARD TEST METHODS FOR WATER VAPOR TRANSMISSION OF MATERIALS
  • ASTM C 1306-08 – STANDARD TEST METHOD FOR HYDROSTATIC PRESSURE RESISTANCE OF A LIQUID-APPLIED WATERPROOFING MEMBRANE
  • CAN/ULC-S102 – STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES

Can